What is ABS Control Module? – Its Functions, Diagram, & How it Works

An ABS control module operates by monitoring the wheel speed and using this data to determine when a wheel is about to lock up when braking. Then, in conjunction with other systems, it utilizes the “pulsing” technique to prevent the wheel from locking up, enabling the driver to maintain steering control while braking. This enhances the overall vehicle performance and safety.

To ensure your car can steer in the event of emergency braking is a crucial responsibility of the ABS control module. Since electronic stability control has been required since 2012, antilock brakes, which have been available since the 1980s, are a requirement on all vehicles with model years 2012 and later.

In this reading, I will be exploring the ABS control module, its functions, its diagram, and how it works. I will also be discussing its replacement cost and how to reset it.

Let’s Get Started!

Contents

What is an ABS Control Module?

An ABS (anti-lock braking system) control module is a computer-like electronic device. This control module processes data coming from the ABS sensors. The ECU uses the processed data to create electronic information, ensuring that the system functions as it should.

In other words, a vehicle’s antilock braking system’s control module, or ABS, is a microprocessor that performs diagnostic tests and analyzes data from wheel-speed sensors and the hydraulic braking system to determine when to release braking pressure at a wheel that is ready to lock up and start skidding.

Generally, the engine compartment is where the ABS control module is located. Some vehicles, however, also have it on the frame rail on the driver’s side. To locate the ABS control module, you might have to raise the car. It might also be hidden by plastic covers or panels. To find the ABS control module location for your vehicle’s make and model, consult the vehicle service manual, if you’re uncertain.

where is the abs control module located?

Diagram of an ABS Control Module

abs control module diagram

abs control module diagram 

Functions of ABS Control Module

The ABS control module is responsible for determining what has to be done to maintain safety when the vehicle loses stability or traction. Additionally, it can assist in figuring out how much force should be supplied to each wheel to stop it. Both the needed braking pressure and frequency are being effectively monitored by the control module. To prevent any slippage, it makes use of the sensor information indicating how quickly the tires are spinning.

How Does an ABS control Module Works?

While the vehicle is moving, the ABS control module monitors the speed of the wheels using sensors at each one. The ABS control module receives signals from these sensors and uses them to determine each wheel’s rotational speed. When the driver applies the brakes and the ABS control module detects that one or more wheels are about to lock up, it rapidly pulses the brake caliper at that wheel or those wheels.

In doing so, the risk of the wheel locking up is reduced, enabling the driver to brake while still maintaining steering control. However, to do this, the ABS control module utilizes a process called “pulsing.” A wheel that is about to lock up can be pulsed by quickly applying and releasing the brake pressure.

When a wheel is about to lock up, the ABS control module will pulse the brake, releasing the pressure temporarily to slow the wheel down and prevent locking. Until the car comes to a stop, the pulsating process is repeated numerous times per second.

The traction control system and stability control system are two other systems with which the ABS control module works to enhance overall vehicle performance and safety. For instance, if the ABS control module detects that the car is understeering or oversteering, it will apply brake pressure to certain wheels to assist in stabilizing the vehicle.

Can one drive a car with a bad or failing ABS control module?

The symptoms of an ineffective ABS control module should never be disregarded because they are crucial for safe driving. Driving with a defective ABS module will reduce engine efficiency and have a number of negative effects on the vehicle’s performance.

Is the ABS control module repairable?

Yes, the ABS control module can usually be repaired, but it is not an easy job. Furthermore, replacing them could sometimes be much more expensive than simply repairing them. If you want to know if your ABS module can be fixed or if it needs to be changed, you should speak to a mechanic or a car dealer.

How much does it cost to replace the ABS control module?

The replacement of an ABS control module typically costs between $940 and $990. The cost of labor is expected to be between $100 and $130, and the cost of parts is anywhere between $830 and $900. Taxes and other costs are not included in this range, nor are your particular vehicle or geographic area taken into account. There might be more repairs required.

How can you reset an ABS warning light?

Before you think of resetting the ABS system, make sure all the ABS issues have been fixed. However, you will ideally need an OBD code reader, a new ABS sensor, and a screwdriver to reset the ABS warning light.

Here’s how to reset an ABS warning light:

Disconnect the positive cable from your car battery

Your automobile battery’s positive cable should be disconnected. Next, keep your foot firmly planted on the brake pedal to shut off the car’s electrical system. The central computer of the vehicle will reset as a result of this. Reconnect the cable to restore power. This ought to reset the light if the system has no issues.

Replace ABS sensor

You might need to replace the ABS sensor if the light remains after the reset. In order to do this, you should unplug the sensor’s cable and unscrew the sensor’s housing, which should be mounted to the wheel hub. Next, mount and attach a new sensor. The above-mentioned method may be required to reset the computer after you’ve successfully installed the sensor.

Utilize an OBD code reader

If the light continues to illuminate, you should utilize an OBD-II gadget to figure out what’s wrong because the car still believes there is a problem that warrants the light. Take your car to a shop to have the issue identified and fixed if you don’t have an OBD code reader.

FAQs

How much does it cost to replace the ABS module?

ABS control module replacement costs $493 on average nationally.

Can you drive with a broken ABS module?

As long as your standard brake system is working properly, you can continue to drive without an ABS control module. However, exercise extra caution, especially in slick or wet conditions, as the brakes’ anti-lock component won’t function, and if your tires lock up, you’ll probably lose steering control.

What causes an ABS control module to fail?

The majority of ABS issues arise when metal shavings or other particles contaminate sensors. Inconsistent or no continuity caused by broken sensor wiring also leads to malfunctions.

What are the symptoms of a failing ABS module?

  • The ABS warning light comes on
  • Locking Wheels
  • increased effort when braking
  • Misreadings on the speedometer
  • unresponsive brake pedal

How do I reset my ABS module?

  • Disconnect the positive cable from your car battery
  • Replace ABS sensor
  • Utilize an OBD code reader

Is it OK to drive with the ABS light on?

With the ABS light on, it is safe to drive cautiously. However, act quickly to have it examined. As regular braking is unaffected by the ABS light, you can continue to operate the vehicle while it is illuminated. However, we wouldn’t advise you to do this because driving without your ABS system might be risky and it helps control stops.

How long does it take to reprogram the ABS module?

The ABS control module will be reprogrammed by your dealer to do this. The job will be completed in about half an hour.

Can an ABS module stop a car from starting?

It won’t stop your car from starting if you are certain that the ABS relay is gone. The brake system is the only system that uses that circuit. If the engine does not quickly turn over when you turn it on, your battery is probably weak or there is another connection problem.

How long should an ABS module last?

A new ABS module is usually needed after 10 to 15 years, but your vehicle could also require one after 100,000 to 200,000 miles.

That is all for this article, where we discussed about ABS control module. I hope it was helpful, if so, kindly share it with others. Thanks for reading, see you around!