Buying Guide

Top lists of best drill presses

The addition of a tabletop drill press to a workshop makes a clunky, potentially hazardous task safer. Dress presses give a stable surface to hold or even clamp the workpiece down for drilling as opposed to holding it precariously in the hand. They can also be used by DIYers for sanding and grinding. Mortisers are specialized types that can even produce flawless joinery.

Handheld power drills work well for boring rough carpentry holes and establishing pilot holes, but they are not the best tool for producing extremely precise holes in your workpieces. You will want a drill press for this kind of job.

The vertical drill bit on these motorized instruments is mounted to a substantial metal frame, which offers the stability and gripping support required to drill incredibly straight holes in wood, metal, or plastic. With a wide rotating handle and an integrated depth stop, you can easily lower the bit into position and be certain that the holes will always be the same depth.

Well in this article, I’ll be listing the top and best drill presses you should be considering for your woodworking or metalworking workshops. Note that this post is not sponsored, all drill press brands listed below are based on the top performing in today’s industrial market.

Best Drill Presses

So, let’s dive in!


Best Drill Presses

The followings listed below are the lists of the best drill press you should be considering for your workshop:

  • SHOP FOX Bench-Top Oscillating Drill Press
  • Eurotool DRL-300.00 Small Benchtop Drill Press
  • JET J-2530 15-Inch Drill Press
  • DREMEL Workstation Drill Press
  • WEN 4208T 8-Inch 5-Speed Drill Press
  • DEWALT 2-Speed Magnetic Drill Press
  • DEWALT DWE1622k Magnetic Drill Press
  • RYOBI 10 in. Drill Press with EXACTLINE Alignment


Read more: Top Lists of Best Cheap Welders

SHOP FOX Bench-Top Oscillating Drill Press

This Shop Fox model is not only a superior drill press, but it also functions as a bench-mounted sander. It is practical for a variety of sanding activities since an oscillating spindle assures compatibility with sanding drums between 1 and 2 inches in diameter.

A removable safety key also completely prevents the possibility of accidental starts, which is always a welcome benefit when working with such large, powerful equipment. Despite being a little smaller than most, the 7 x 7-inch table’s 90-degree tilt flexibility is a valuable feature for both drilling and sanding.

discover product

Eurotool DRL-300.00 Small Benchtop Drill Press

There’s no need for a big machine that will take up a lot of room and have more power than you require if all you want a drill press for is precision work on small objects like jewelry, shells, wood trim, or building models. The Eurotool DRL-300.00 Small Benchtop Drill Press is a better option.

The drill press fits into any workspace with ease thanks to its small platform size of 6.75 inches by 6.75 inches and overall dimension of 10 by 12 by 8 inches. Although it’s not made for the most difficult drilling duties, despite its small size, it has some power. There are three-speed options on the 110-volt motor, which has a top speed of 8,500 rpm. Bits up to 6.5 mm can be inserted into the 14-inch Jacobs chuck.

discover product

Read more: Lists of Best Torque Wrenches

JET J-2530 15-Inch Drill Press

This robust tabletop drill press from JET is equally at home in a production environment as it is in a do-it-yourself workshop. With a 15-inch throat and a 3/4-horsepower motor, the J-2530 from JET can drill through some tough materials. When the user wants to move the worktable out of the way, it can swivel up to 360 degrees and tilt 45 degrees to the left and right. The motor has 16 speeds that range from 200 to 3,630 revolutions per minute. Its large throat is complemented by a 33 8-inch travel. A bit guard and a large on/off switch are also included.

When compared to the other models, I found the JET to be exceptionally quiet and smooth during the test. I liked that there are numerous pulley combinations available for regulating speed (which was a little confusing at first). And no matter what I threw at it, the heavy-duty motor didn’t seem to bog down at all. The only significant issues with this model are its high price and weight (over 150 pounds).

discover product

DREMEL Workstation Drill Press

You’ll need to provide your own Dremel tool, but if you already own one and want to increase the precision and consistency of your hole depths, this might be the ideal solution. You can drill and sand at almost any angle you need because the tool holder—but not the table—rotates up to 90 degrees.

We particularly appreciate the tool holder’s cord management clips, which prevent your power cord from getting in the way of your work. There is a significant probability that your Dremel tool will fit this press because it is compatible with a wide variety of Dremel tools.

discover product

Read more: Lists of best portable tire inflators

WEN 4208T 8-Inch 5-Speed Drill Press

The WEN 4208T is a reasonable-cost alternative to a drill press if you don’t mind sacrificing some performance and control. The press forgoes a variable control dial with more flexibility in favor of a five-speed switch with a maximum speed of 3,140 rpm. The 1/3-horsepower motor is adequate for modest to medium applications and works well with standard building supplies, even very hard timbers.

Most worktables can be mounted with a cast iron base for a strong, secure grip. You may tilt the drilling surface of the accompanying 6.5 x 6.5-inch beveling table up to 45 degrees for angled drilling despite its small size.

Due to its 8-inch swing and 2-inch stroke distance, this drill press is not intended to handle heavy or thick materials. Even mounting clamps and vises can be mounted in the table’s slots to hold the drilling surface to the table while it tilts.

discover product

JET 17-Inch Drill Press

This Jet model and its high-end design may be exactly what you’re searching for if you’ve decided to use a floor press rather than a bench-top choice. Its integrated laser and LED light ensure that you have a clear, accurate view of your workpiece, and both can be angled to your preference.

Large items may be supported and stabilized on the extra-large work surface, and at 187 pounds, the complete device should be very stable. Its huge power button, designed like a paddle, makes it simple to switch it off quickly, which is always a useful safety feature.

discover product

Read more: Lists of best mechanic toolsets

DEWALT DWE1622k Magnetic Drill Press

Working with wood or polymers is different from drilling through metal. You need a drill press that is extremely flexible for various types of metal since metal densities vary. With a two-speed, 10-amp motor and 4-inch drill travel, the DEWALT DWE1622k Magnetic Drill Press is designed for drilling through steel or metals that are similar to it. The tool can be placed on any ferrous surface that is at least 1/2 inch thick thanks to its magnetic base. The tool can accommodate bits up to a maximum diameter of 2 inches.

The press incorporates electronics that prevent motor burnout and increase the tool’s lifespan through overload protection. It has a coolant tank that you may move around while working. You can easily penetrate even very hard metals with the lower speed setting, which revs up to 300 rpm, and the higher level, which revs up to 450 rpm. The drill press weighs 35 pounds, which is a substantial amount, but it is a strong, effective tool.

discover product

RYOBI 10 in. Drill Press with EXACTLINE Alignment

Check out this Ryobi model if you’re a DIYer searching for a 10-inch drill press that you can trust but also lift on and off your tabletop. This drill press’s selectable speeds are between 620 and 3,100 rpm and the 12-inch chuck’s 218-inch travel enables it to perform some larger drilling tasks while being a relatively small model.

This Ryobi model was one of my favorites. Even with the onboard light on, the laser was visible and brilliant. The worktable on this particular model has a crank system, which is something that many smaller drill presses lack. Even though my particular model chattered a little, the bench was simple to put on and take off because of its small size and low weight.

discover product

Read more: Lists of best magnetic drill press

Some other best drill press

Below is some other drill press you should consider as best:

JOYABEST 3-Speed Mini Drill Press Machin

Shop Fox W1668 3/4-HP 13-Inch Benchtop Drill Press/Spindle SandePowermatic 3/4 HP Bench Mortiser

WEN 5-Amp Variable-Speed Bench Drill Press

Delta 18-900L Laser Drill Press

BILT HARD 5 Amp 12 in. Variable Speed Drill Press

Dremel 220-01 Drill Press

WEN 8-Inch 5-Speed Drill Press

Dremel Drill Press Rotary Tool Workstation Stand

WEN 4214T 12-Inch Variable Speed Drill Press

Drill Press FAQs

Which is the best drill press?

The followings are the best drill press brands:

  • WEN 5-Speed Drill Press. – Best Overall.
  • SKIL 10-Inch Drill Press. – Most Precise.
  • Shop Fox Floor Drill Press. – Most Powerful.
  • DEWALT Drill Press. – Most Compact.
  • Milescraft Drill Press Stand. – Best Stand.
  • WEN 12-Inch Variable Speed Drill Press.
  • Milescraft Drillmate Drill Guide with chuck.

What is good horsepower for a drill press?

Motor power is measured in horsepower (HP). For infrequent users or people who only occasionally need to drill holes in lighter materials, a tiny drill press with a 3/4 HP motor is the ideal choice. For professionals who use them frequently, a drill press with a 1/2 HP motor is suitable.

What size drill press is best for woodworking?

JET 16-1/2-inch JDP-17MF Floor Drill Press and Delta 18-900L 18-Inch Laser Drill Press are the best drill press for woodworking.

Is a benchtop drill press worth it?

Only the greatest benchtop drill press will do when a DIY project calls for precise drilling. When drilling wood, metal, and other materials, these practical instruments are more precise and reliable. The best part is that there are many excellent solutions available nowadays.

Read more: Lists of Best Grease Guns for Equipment

Which drill machine brand is best?

Consider the following drill machine brand:

  • DeWalt DCD701F2 Xtreme 12V Max Brushless 3/8 in.
  • Bosch PS31-2A 12V Max 3/8 in.
  • DeWalt DCD791D2 20V Max XR Li-Ion Brushless Compact Drill/Driver Kit.
  • Milwaukee 2801-22CT M18 1/2 in.
  • Ridgid R87012 18V Brushless SubCompact Cordless Drill Driver Kit.

What are the two types of drill presses?

Drill presses come in two primary categories: benchtop and stationary variants. Benchtop variants are more compact, lightweight, and transportable. Floor models have more power, capacity, and features but are heavier and more difficult to move.

What are the disadvantages of a drill press?

Ideally, a conventional drill may be used to operate on materials of any size. However, due to limitations like the space between the table and the chuck and elements like the stroke distance and swing distance of the model you are using, which can limit the capacity, this is not achievable with a drill press.

What is the most commonly used drill press type?

The most popular drill press for non-production drilling is a single-spindle, floor-mounted, belt-driven device. If operators touch the revolving bit or chuck or attempt to hold the stock by hand while drilling, they risk serious lacerations and entanglement.

What are the 3 types of drill presses?

The Different Types of Drill Presses

  • Upright Sensitive Drill Press.
  • Upright Drill Press.
  • Radial Arm Drill Press.

What are the 5 important rules for a drill press?

Some Important Drill Press Safety Rules

  • Run the drill at the correct RPM for a diameter of a drill bit and material.
  • Always hold work in a vise or clamp to the drill table.
  • Use a correctly ground drill bit for the material being drilled.
  • Use the proper cutting fluid for the material being drilled.
  • Remove chips with a brush, never by hand.


Read more: Lists of Best Engine Degreaser

That is all for this article, where the lists of the best drill press are discussed. I hope it was helpful, if so, kindly share it with others. Thanks for reading, see you around!