Lists of best floor jacks

A top-notch floor jack is essential if you plan to conduct some mechanical work yourself or if you’re opening a shop. The last thing you want to do is spend money on the wrong floor jack, though, given how much depends on it.

A floor jack is a device that every garage should have on hand. You can have the best tools and the best-equipped garage, but if you can’t get to the components of your vehicle that need maintenance, none of those things will be useful. A floor jack is an asset to have on hand at all times, whether you need to do maintenance on your car or truck, change the oil, replace a flat tire, or do other repairs.

Well, in this article, I will introduce you to the best floor jacks for commercial cars, and trucks. Although they can be used to lift other equipment. Note that this is not a sponsored post, this list is based on the top-performing floor jacks in the industrial market today.

best floor jacks

So, let’s dive in!

Contents

Best floor jacks

The followings are the lists of the best floor jacks in the industrial market:

  • Pro-Lift F-767 Grey Low-Profile Floor Jack
  • Pro-Lift Hydraulic Trolley Jack F-2315PE
  • Powerbuilt 2 Ton Extra Low-Profile Floor Jack
  • Standtall Electric Car Jack
  • Pittsburgh 3-Ton Heavy Duty Floor Jack with Rapid Pump
  • Torin BIG RED Steel Scissor Lift Jack T10152
  • AFF 4 Ton Heavy Duty Floor Jack
  • OTC HDJ5P Air/Hydraulic Service Jack
  • Hein-Werner 4 Ton Long Chassis Service Jack
  • Torin BIG RED Hydraulic Bottle Jack T90803B

 

Pro-Lift F-767 Grey Low-Profile Floor Jack

Pro-Lift F-767 Grey Low-Profile Floor Jack

We (along with tens of thousands of other customers) like this jack from Pro-Lift if you don’t work on your car frequently but still want a significant improvement over a scissor jack. It is a low-profile, single-cylinder automobile jack with a two-ton lifting capacity and a range of 3.5 to 14 inches. A built-in safety valve offers overload protection, meaning it won’t lift if there is too much weight on it, which can blow out seals and valves. The company uses a patented bypass device to prevent over-pumping. Both of these features make driving safer, but once more, jack stands should always be used whenever you’re crawling underneath a car.

Conveniently, it weighs 30 pounds, which is far less than most other hydraulic jacks, and it features a top grip made of molded plastic for lifting. Like these, light-duty car jacks have been around previously, and they’ve worked just fine. Its dimensions, which are smaller than the huge jacks, are 17.91 x 5.32 x 8.47 inches. Being narrow is bad for stability; it requires more pumps to raise than a dual-cylinder quick-lift jack and doesn’t raise as high, but it is only 3.5 inches tall at its lowest point, so it isn’t much it can’t fit under. A tiny 2.25-inch saddle easily revolves. A garage jack might not be able to fit into that small of a space to support a car, but it does fit into small factory jacking points.

discover product

Pro-Lift Hydraulic Trolley Jack F-2315PE

Pro-Lift Hydraulic Trolley Jack F-2315PE

This automobile jack is made of welded steel and has a lift capacity of 1.5 tons (3,000 pounds). Expect it to be unable to lift mountains because its maximum lift height is a modest 12 inches and it only weighs 18 pounds. This is one of the best portable car jacks to have in your car or truck so you’ll be prepared if you ever get a flat tire because it keeps things tidy and clean and also includes a handy carrying box.

Take hold of this Pro-Lift unit if you need a floor jack but money is tight. It’s small, light, and, believe it or not, mighty, all for less than $50. On Amazon, it has received a 4.4-star rating from more than 7,000 customers.

discover product

Powerbuilt 2 Ton Extra Low-Profile Floor Jack

Powerbuilt 2 Ton Extra Low-Profile Floor Jack

Wide base and roller characteristics help this floor jack maintain stability, while ball-bearing swivel casters make it simple to move throughout your garage. When not in use, you can transport the jack to storage using the carry handle on the back.

Powerbuilt’s Xtra Low Profile Floor Jack is designed for vehicles as low as 2.75 inches, and it can raise to 15.5 inches if you have a lowered vehicle, or merely a sports car or classic vehicle. It’s also a fantastic choice if you have a unibody car and find it challenging to set up jack stands without access to the frame rails.

It has a steel safety bar that slides underneath the lift arm to hold the jack in its high position, explaining why. Although the manufacturer claims the safety bar replaces the requirement for jack stands, we would still use jack stands whenever we were getting beneath our car.

The all-steel structure adds weight, weighing in at 58.7 pounds, and the arm design limits how far you can bury it beneath your car. Its dimensions are 13.4 x 24.7 x 7.75 inches, making it small. The saddle is not rotating and is tiny. Although it includes a rubber insert, none of them last very long.

discover product

Standtall Electric Car Jack

Standtall Electric Car Jack

One of the best electric jacks available is this one. Yes, you read that correctly. It is powered by the 12-volt power plug in your car. It’s essentially a modified scissor jack with a small motor that spins the threaded portion of the jack to conveniently raise the vehicle with the touch of a button. This jack rises to its highest position, which has a lifting range of 17 inches, in around 2 minutes.

Not only that, but it can raise a total of 3 tons (6,000 pounds). It is offered in a kit that also includes an electric impact wrench, a small air compressor, and other small items, making it incredibly useful and something you should keep in your car just in case. At only $121, this arrangement is a good deal as well.

discover product

 

Pittsburgh 3-Ton Heavy Duty Floor Jack with Rapid Pump

Pittsburgh 3-Ton Heavy Duty Floor Jack with Rapid Pump

The Pittsburgh 3-ton floor jack can fit under almost any car with a minimum height of just 5 1/8 inches and a maximum lift height of 18 14 inches. The jack is 27 1/2 inches in overall length, 14 3/8 inches in breadth, and 45 5/8 inches in handle length. Make sure to lift with your legs because the advertised delivery weight is 83 pounds. could leave the deliveryman a gratuity as well.

The Pittsburgh 3-Ton Heavy Duty Floor Jack is tough to match in terms of value. Although this jack can lift 6,000 pounds, as the name suggests, our favorite feature is the Rapid Pump technology, which uses a dual parallel pump system to lift the majority of loads in just 3 12 pumps.

Additional features include extra-wide steel casters for improved stability, a protective foam bumper on the jack handle to prevent scratches on your car, and heavy-duty precise welding. To prevent your vehicle from descending too quickly, it also provides precision control load descent.

discover product

 

Torin BIG RED Steel Scissor Lift Jack T10152

Torin BIG RED Steel Scissor Lift Jack T10152

As with several of the other floor jacks mentioned here, this small Torin specimen can sustain 1.5 tons (3,000 pounds), but, get this, it only weighs 7.7 pounds, less than a gallon of milk! You can keep one of these lightweight floor jacks in your car in case you get a flat because they are quite small and portable. Scissor jacks undoubtedly have their benefits, but they can also be slower and trickier to use than other jacks.

This list has so far only included hydraulic automobile jacks, which are simply jacks with long arms and swivel-caster wheels. But just now, let’s focus on a different kind: the scissor jack. These are about as straightforward as they get mechanically, using a threaded screw and a crank handle in place of hydraulic fluid and a pumping mechanism.

discover product

 

AFF 4 Ton Heavy Duty Floor Jack

AFF 4 Ton Heavy Duty Floor Jack

When an SUV like a Chevy Tahoe may weigh approximately 6,000 pounds, working on one requires a substantial jack. A four-ton (4T) is produced by American Forge & Foundry and offers consumer-level performance close to that of a professional model.

Don’t think you’ll be throwing 105 pounds of solid steel around. Its 14.33-inch width and 28.82-inch length give you additional stability when carrying hefty objects. Larger vehicles require higher lift heights, and this vehicle has 16.2 inches of lift, ranging from 4.3 inches at its lowest point to 20.5 inches at its tallest. It features a fixed and cushioned rubber saddle, as opposed to the metal saddles with rubber inserts on lighter jacks, which is crucial for preventing slippage of trucks and SUVs.

It utilizes two hydraulic cylinders to speed up and simplify lifting, and the long handle detaches for convenient storage. The manufacturer offers a huge selection of repair and replacement parts.

discover product

OTC HDJ5P Air/Hydraulic Service Jack

OTC HDJ5P Air Hydraulic Service Jack

This right here is a professional-grade, high-quality floor jack. It is quite expensive at $1,109, but for dealerships and maintenance facilities, it’s hard to beat. This air-assisted hydraulic jack was created by the well-known OTC firm and is a true honey with a ton of high-end features. The hydraulic ram is chrome plated for increased durability, and it has a bypass feature that prevents you from lifting more than its 5-ton (10,000-pound) weight-capacity rating. Other features include a spring-loaded handle that locks in three positions, front roller bearings, and aft-mounted casters that roll and turn effortlessly. It should be virtually indestructible at a hearty 196 pounds.

discover product

Hein-Werner 4 Ton Long Chassis Service Jack

Hein-Werner 4 Ton Long Chassis Service Jack

The chassis is exceptionally robust, which contributes to the 219 pounds of weight that hug the garage floor. Additionally, it is 15 inches broad, which is crucial given the large loads it is intended to support. The largest passenger cars, loaded trailers, small dump trucks, other commercial vehicles, or agricultural machinery like tractors can all be lifted by four tons.

The 4-ton Hein-Werner, which is built entirely of steel in the USA, can only be raised with a garage lift. This beast is 49 inches long, has a 20.75-inch lift, and can fit under practically anything. Its lift ranges from 5 to 25.75 inches.

A sealed, dual-piston hydraulic cylinder with the model number HW93657 features inbuilt safeguards against overloading and excessive pumping. The long handle has three pumping positions and uses a knob for precise lowering control rather than a twist to release.

discover product

 

Torin BIG RED Hydraulic Bottle Jack T90803B

Torin BIG RED Hydraulic Bottle Jack T90803B

In addition to floor and scissor jacks, you should also think about bottle jacks. These jacks resemble small flagons, as their name would imply, and have wide bottoms and pumping devices on the side. These jacks are small, quite inexpensive, and incredibly strong. The model highlighted has a remarkable lifting capacity of 8 tons (16,000 pounds), but it just costs $40.

The manufacturer also provides a wide selection of additional types, including jacks that can handle up to 50 tons, or 100,000 pounds, or 4, 6, 10, 12, 20, and even 30 tons! With a lifting capacity of 9.5 to 18 inches and drop-forged steel construction for increased durability, this 8-tonner is covered by a one-year warranty.

discover product

Floor Jack FAQs

What brand of floor jack is best?

The following are the lists of the best floor jack

  • Pro-Lift F-767 Grey Low-Profile Floor Jack
  • Pro-Lift Hydraulic Trolley Jack F-2315PE
  • Powerbuilt 2 Ton Extra Low-Profile Floor Jack
  • Stand tall Electric Car Jack
  • Pittsburgh 3-Ton Heavy Duty Floor Jack with Rapid Pump
  • Torin BIG RED Steel Scissor Lift Jack T10152
  • AFF 4 Ton Heavy Duty Floor Jack
  • OTC HDJ5P Air/Hydraulic Service Jack
  • Hein-Werner 4 Ton Long Chassis Service Jack
  • Torin BIG RED Hydraulic Bottle Jack T90803B

Do I need a 3 or 4-ton floor jack?

Therefore, a jack with a higher weight rating is required if you have a larger, heavier car. Most jacks are rated for 1.5 to 3 tons, which is sufficient to hold the majority of cars. A 4-ton jack may be required for larger cars, such as full-size pickup trucks and SUVs.

What kind of floor jack should I buy?

Heavier-duty 3- or 4-ton steel jacks are becoming more and more popular than 1.5-ton models. Do you require that much capacity, though? While the majority of Pro users can get away with 2.5-ton machines, repair shops often choose at least 3 tons to be safe.

What brand of floor jack does NASCAR use?

The Pit Boss® has established its dependability in the winning circles of NASCAR and Open Wheel racing since its introduction in the 1995 racing season. When firm founder John Bickford looked for a stronger pit stop jack for his stepson Jeff Gordon and his Hendrick Motorsports team, the first Pit Boss jack was born out of need.

Are Pittsburgh floor jacks any good?

Steel of industrial grade is used to make Pittsburgh floor jacks. This steel is without a doubt one of the strongest products available. Because of this, the jack may be used for almost any lifting task. It is better for individuals on a budget because it is also more affordable than aluminum.

Who builds snap-on jacks?

Snap-on is a division of Snap-on Incorporated, a publicly traded business with the ticker code SNA. The business has been around for more than a century and is still a premium tool brand. Their equipment is renowned for its dependability, superb ergonomics, and premium features.

Is a 3-ton floor jack enough?

You’re. Almost perfect with a three-ton Jack is a wise generalization to make. That makes up 3/4 of the weight of the car. Thus, if your car weighs 4,000 pounds, you would divide that number by three.

How do I choose a floor jack?

Finding what you require across a range of areas is necessary when selecting a floor jack. The most crucial factor is weight capacity since if your jack is unable to safely sustain the weight of your car, it is unsafe to operate. To make sure you obtain the proper size jack, you should also verify the height clearance.

Then, decide if you want a normal, bottle, farm, scissor, or electric jack. Different models have various advantages and disadvantages. Whether you choose an aluminum or steel jack depends on whether you want a jack that is lighter or sturdier. When you have a budget, you can finally find the jack that’s best for you.

Are aluminum floor jacks worth it?

If you want a floor jack that is simple to handle and move around, investing in an aluminum model is worthwhile. Aluminum weighs significantly less than steel, making it much more mobile than steel. This applies whether you’re transporting your jack somewhere to work or just pulling it out of the trunk. As opposed to wooden jacks, steel jacks are more durable. You might choose a steel jack if toughness is more essential to you than portability.

How do you jack up a car?

To assure safety, jacking up a car involves a complex operation with numerous steps. Make sure your automobile is in a secure location, put it in a park, and press the emergency brake before anything else. To make the automobile more stable, you could choose to place anything in front of or behind the tires that would stay on the ground. The next step is to grab your jack and secure it to the car’s jacking point. To support the weight, place a jack stand beneath the car’s jacking point as well. After finishing your task, you can jack up your automobile and, in that sequence, remove the jack stand, jack, and any wheel blocks.

Related Article:

Conclusion

There are tons of different jacks from different brands claiming to offer quality. With such in mind, we’ve listed top-notch brands and products that make the best floor jacks in today’s market. I hope you get a lot from the reading, if so, kindly share with others. Thanks for reading, see you around!

Scroll to Top